User's Manual

2. Camera transmitter operation:
2.1 The camera transmitter is installed in the rear side of the car; when used for reversing, please connect to power
supply of taillights; if installed in the car, the door can be connected to the power supply of interior lighting, or
other 8V-30V DC power supply system. When connected to the power cord in parallel, the red wire is +, and
the black wire is -. Prevent short circuit and take insulation measures, because electrical short circuit can cause
fires and other serious consequences. Camera transmitter features reverse connection prevention, and the
machine won’t be damaged in the event of reverse connection.
2.2 When it is used for the first time, pair code with the receiver; select CAM1 or CAM2 channel for the receiver,
press the Confirm key to enter the pairing mode, and then press the PAIR key within 20S, wait for the code
pairing to complete, ensure that the wireless signal isn’t interfered with in the pairing process, and the receiver
will display PAIROK after pairing successfully
Icon, if the pairing isn’t completed in time, it will return to previous state. For the installed machine, the
pairing requires two persons for cooperation.
2.3 One camera transmitter only can be paired with one channel, the receiver has two channels, which can be
paired with one camera transmitter individually or with two camera transmitters simultaneously to form dual
channel and meet different monitoring requirements.
2.4 The paired camera transmitter can trigger the receiver working automatically after powered, and the screen
display delay is less than 1 second.
2.5 The camera transmitter features infrared night vision; if the lighting is insufficient in the evening, the infrared
LED automatically turns on infrared supplementary lighting.
V. Product Installation
1. Install the retaining bracket on the receiver, as shown in the following picture:
2. Install the receiver together with the retaining bracket on the console or windshield of the car.