User's Manual

• Reconnecting-LED

It is used to indicate that the Bluetooth keyboard is reconnecting to the already founded

receiver after waking up or power up via the accordant authority (registered password or PIN).

• Battery Low-LED

It is used to indicate that the battery is below 2.4 Volts. It keeps on until new battery is installed

or the battery is total used up. It is flashing only while the keyboard is not

in sleep mode.

2.2 Operating modes of the Bluetooth keyboard

• Sleep-Mode

After 15 minutes of no keyboard input, the Bluetooth keyboard will automatically enter into sleep mode to

preserve battery power.

• Wake up-Mode

To wake the Bluetooth keyboard up, press any key of the keypad (not

the L and R button of touchpad or the

touchpad itself!).

• Reconnect-Mode

After reactivation the keyboard reconnects automatically with the Bluetooth dongle. Depending on environmental

conditions for the radio transmission it takes less than a second or up to several minutes to reconnect. In the

meantime, the Reconnection-LED is blinking (cp. for that 2.1).