User's Manual

1. Installation
1.1 System Requirements
Determine that your PC, notebook, tablet, „Handheld“ or similar is on the hardware side
already Bluetooth-enabled.
In this connection this keyboard is then compatible to all systems supporting the Bluetooth HID-profile correctly.
1.2 Preliminaries
Ensure that the accompanying Bluetooth driver software, which belongs to your used Bluetooth component
(integrated Bluetooth module respectively external Bluetooth dongle receiver) is or was installed correctly on your PC.
Please refer to the manual of the accompanying Bluetooth component manufacturer.
For already embedded Bluetooth module
• If you computer (PC, notebook, tablet, „handheld“ or similar) was provided by manufacturer with an integrated
Bluetooth module, please use the included and preloaded Bluetooth driver software. You do not need to install
other Bluetooth driver software.
For later installed, external Bluetooth dongle receiver
• If your PC is running Windows XP (SP2) and Vista and the IC of your Bluetooth dongle receiver is from
manufacturer CSR, please use the included and preloaded Microsoft Bluetooth driver software.
You do not need to install other Bluetooth driver software. If you do not like to use the Microsoft Bluetooth driver
software for any reason, you can install optionally Bluetooth driver software Toshiba or BlueSoleil (from software
manufacturer IVT).
• If your PC is running Windows 98 (SE), ME or 2000 and the IC of your Bluetooth dongle receiver is from
manufacturer CSR, please first install the Bluetooth driver software Toshiba or BlueSoleil (IVT).
• If your PC is running Windows 98 (SE), ME, 2000, XP (SP2) and Vista and the IC of your Bluetooth dongle
receiver is from manufacturer ISSC (Integrated System Solution Corp.), please first install the Bluetooth driver
software BlueSoleil (IVT).
• If your PC is running Windows 98 (SE), ME, 2000, XP (SP2) and Vista and the IC of your Bluetooth dongle
receiver is from manufacturer Broadcomm, please first install the Bluetooth driver software WIDCOMM.
Advice: Most of Bluetooth keyboards can not operate under BIOS or DOS environment due to the Bluetooth dongle
operated in the HCI (Host Controller Interface) mode only. A dual-mode (HCI and HID – Human Interface Device)
Bluetooth USB dongle enables the Bluetooth keyboard to operate in BIOS and DOS environment.