Product Manual

6
8. Attach Undercarriage Support and Reinforcing Strip to the Body using eight 3/8” x 1” Hex Head Bolts,
inserting them into 3/8” Flat Washers through the holes in the Body, Undercarriage, then through
Reinforcing Strip and secure with 3/8” Lock Washers and 3/8” Hex Head Nuts. of See Figure 7.
Figure 7
Undercarriage
Reinforcing Strip
3/8” Lock Washer
3/8” Hex Head Nut
Body
7
Figure 8
9. Attach the Pedestal on top of Reinforcing Strip and Handle using four 5/16” x 2”” Hex Head Bolts,
the bolts go through a 5/16” Flat Washer then into the front holes in the Body, through the holes in
the Pedestal then through the Handle. Secure with 5/16” Nylock Nuts. See Figure 8.
Pedestal
Handle
Reinforcing Strip
Body
5/16” Nylock Nut