Product Manual
10
Parts and Support
Please do not return this product to
the
store prior to contacting Precision.
At Precision Products, Inc. our goal is to deliver
quality, value and outstanding service. If for
any reason our product does not meet your
expectations, please contact us and we will take
care of any problem you may have with this
unit.
When ordering replacement parts please have
the model number, part description, part
number, inspector number and date on carton,
available so that we can best serve you.
1 (800) 225-5891
www.precisionprodinc.com
Precision Products Inc.
316 Limit St.
STOP
Operation
TO DUMP - Pull Latch toward lawn tractor
and Cart Body will tilt back to dump
position.
TO RETURN TO PULLING POSITION - Push
down on front edge of Cart Body until Latch
engages and secures to Tow Bar.
Tractor speed should be governed by
weight of load. The heavier the load, the
slower the speed for safe operation.
Maintenance Instructions
Keeping the cart clean and dry will prolong
the unit’s life.
Grease Wheels at regular intervals, at least
once every six months, more frequently if
used regularly.
Should rust develop, sand lightly then paint
area with enamel paint.
Check tire pressure at regular intervals.
Proper inflation will prolong the life of tires
(see side of tire for inflation amount.
11. To convert your Trailer from Pull unit to a push unit, remove the #203 Hitch Pin Clip from the
side of Tow Bar. Remove the 5/16” x 3-1/2” Clevis Pin, turn the Short Tow Bar around until it rests
inside of the Long Tow Bar, insert the Clevis Pin into the fourth hole from the front of the Long Tow
Bar and secure with the Hitch Pin Clip. See Figure 10.
Fourth Hole
#203 Hitch
Pin Clip
5/16” x 3-
1/2” Clevis
Pin
Figure 10
8
3
Ref.
Qty. Description
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
1
1
1
1
2
1
1
1
1
1
1
4
8
2
4
2
1
1
Body
Pedestal
Undercarriage
Handle
Wheels
Axle
Long Tow Bar
Short Tow Bar
Leg
Latch
Clevis Plate
5/16” x 3/4” Truss Head Bolt
3/8” x 1” Hex Head Bolt
1/4” x 3” Hex Head Bolt
5/16” x 2” Hex Head Bolt
1/4” x 3-1/2” Hex Head Bolt
5/16” x 3-1/2” Clevis Pin
1/2” x 1-3/4” Clevis Pin
Not Shown Full Size
12
23
20
19
18
17
16
15
14
13
27
24
28
32
30
31
25
26
29
22
21
Ref.
Qty. Description
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
1
1
2
8
4
4
4
8
4
2
2
1
1
4
1
4
8
2
#14 Hitch Pin Clip
#203 Hitch Pin Clip
1/8” x 1-1/4” Cotter Pin
3/8” Lock Washer
5/16” Lock Washer
5/16” NyLock Nut
3/4” Flat Washer
3/8” Flat Washer
5/16” Flat Washer
1/4” Flat Washer
1” x 1” Spacer
Spring
1/4” x 3” Metal Spacer
1/4” Nylock Nut
Cross Tube/4” Hex Head Nut
5/16” Hex Head Nut
3/8” Hex Head Nut
Reinforcing Strip
34
35