Installation guide

MIN 100100
MAX 20
200
213
MIN 100
MAX 20
100
200
213
135
220
183
119
220
183
215
220
183
125
230
183
MIN 10070
MAX 20
190
213
1716 MECHANICALLY OPERATED CONTROLS & INSTRUMENTS - CONTROLS MECHANICALLY OPERATED CONTROLS & INSTRUMENTS - CONTROLS
Control lever assembly PC-841,
side-mounted
Control mechanism for side-mounting,
part no. 1140095.
Control lever assembly PC-841,
side-mounted with Power Trim
function
Control mechanism for side-mounting,
part no. 1140095.
Control mechanism for side-mounting
The control mechanism must be ordered separately for PC-741 and
PC-841 assemblies. Volvo Penta’s control mechanisms have an
uncomplicated and safe design and are manufactured of corrosion-
resistant materials. The mechanism has an accelerated action which
transmits lever movements into even and economic engine acceleration.
Part no Description
1140095 PC-741/841
Control lever assembly PC-741,
side-mounted
Control mechanism for side-mounting,
part no. 1140095.
Control lever assembly PC-840, top-
mounted, single engine installation
with Power Trim function
Control mechanism for top-mounting,
part no. 851600.
Control lever assembly PC-740,
top-mounted, single engine installation
Control mechanism for top-mounting,
part no. 851600.
Control lever assembly PC-740
with sailboat lever, top-mounted
The sailboat control lever is specially designed
for sailboats where lines and halyards could
snag on a joystick. Control mechanism for top-
mounting, part no. 851600.
Control mechanism for top-mounting
The control mechanisms must be ordered
separately for PC-740 and PC-840 control
lever assembly kits.
Volvo Penta’s control mechanisms have a sim-
ple and safe design and are manufactured of
corrosion-resistant material. The mechanism
has an accelerated action which transmits
lever movements into even and economic engine
acceleration.
Two control mechanisms are required for twin
engine installations with single lever controls.
Part no
851600
Control lever assembly PC-840,
top-mounted, twin engine installation
Control mechanism for top-mounting,
2 x part no. 851600.
Control lever assembly PC-740,
top-mounted, twin engine installation
Control mechanism for top-mounting,
2 x part no. 851600.
Control lever assembly PC-840, top-
mounted, single engine installation
Control mechanism for top-mounting,
part no. 851600.
Control mechanisms and cables are not included unless this is specifically stated.Control mechanisms and cables are not included unless this is specifically stated.
Part no
851602
Part no
851603
Part no
1140022
Part no
1140092
Part no
1140091
Part no
853168
Part no
1140043
Part no
853169
Part no Description
3849409 With Power Trim-function,
20 ft harness
3849408 Without Power Trim-function
Top-mounted controls
for twin installation
Controls with combined throttle and
gear-change, equipped with a series of
features to improve comfort and safety.
- Release button for starting and warming
up the engine in neutra-position.
- Adjustable friction brake for individual
speed setting of the lever.
- Electrical neutral position switch, pre-
vents engine being started in gear.
- Integral switches for simple operation of
the drive’s trim and tilt functions.
The controls are supplied with a
control mechanism and cable connec-
tion kit.
Control lever assembly PC-741,
with sailboat lever, side-mounted
The sailboat control lever is specially designed
for sailboats where lines and halyards could
snag on a joystick. Control mechanism for side-
mounting, part no. 1140095.
Part no
1140093
Part no
1140090