Installation guide

ManualsBrandsPrecision Power ManualsStereo SystemPC740.5

45ENGINE ACCESSORIES – CHEMICALS

7–14. Touch-up paint - drive

Part no Colour Pack Quantity, Litres Image

1141567 Blue-grey Spray can 0.4 7

1141575 Grey Spray can 0.4 8

1141560 White Spray can 0.4

1141568 Black, matt Spray can 0.4 10

3851219 Silver, SX, DP-S Spray can 0.4 11

827502 Clear varnish Spray can 0.4

889968 Silver + clear varnish, DPH, DPR, SX-A Spray can, 2 pcs 0.4 + 0.4 13

3851220 Grey + clear varnish, DPX Spray can, 2 pcs 0.4 + 0.4 14

15. Primer

Part no Colour Pack Quantity, Litres Image

1141562 Blue-grey, for drive Spray can 0.4 15

5. Coolant

Yellow and green coolants may not be mixed.

Part no Colour Pack Quantity

1141645 Green Plastic bottle 1 L

1141646 Green Plastic bottle 5 L

21485010 Yellow Plastic bottle 1 L

21485012 Yellow Plastic bottle 5 L

6. Coolant – ready-to-use

Protects down to -25°C. Yellow and green coolants may not be mixed.

Part no Colour Pack Quantity

1141674 Green Plastic bottle 5 L

21485014 Yellow Plastic bottle 5 L

Oil & Water Sorbent Pads

The Oil & Water Sorbent Pads can be used for all engine and drive-

related spills and leaks. Absorbs petroleum products, cooling liquid,

water etc. You can even use it to wipe off the bilge after the work is done.

Features:

• Absorbs up to 0.7 l per pad.

• 400 x 500 x 4.7 mm

• Sold in a roll of 4 pads.

• Made from recycled polypropylene.

Part no

21699859

Bilge Oil Boom

The Bilge Oil Boom is ideal for keeping your bilge safe and clean.

Simply drop or anchor (with attached rope) in the bilge and the Bilge

Oil Boom will efﬁciently absorb waste oil , fuel and hydraulic ﬂuid. Does

not absorb water and will stay aﬂoat even when soaked with oil.

Features:

• Super absorbent and hydrophobic, does not absorb water.

• Absorbs all kinds of petroleum spills.

• Absorbs up to 4.5 l.

• Boom is 380 x 130mm.

• 100% polypropylene absorbent surrounded by spunbond, polypropyl-

ene sock and nylon netting.

Part no

21699860

Touch-up paint - engine

Part no Colour Pack Quantity, Litres

3808214 Green, gloss Tin 1.0

3808216 Red Tin 1.0

3808215 Green, matt Tin 1.0

21952397 White Tin 1.0

1141566 Green, gloss Spray can 0.4

827501 Red Spray can 0.4

3851221 Dark grey Spray can 0.4

Paints

Volvo Penta paints are the best protection against rust and corrosion

for engines, drives and transmissions. The appearance and second

hand values of the engine is enhanced if all painting operations are

carried out using Volvo Penta paints.

1. Liquid sealing agent – master gasket

Replaces conventional paper gaskets and provides an immediate “cus-

tom made” gasket. Resistant to petrol, oil, anti-freeze, transmission oils

and solvents.

Part no Pack Quantity

840879 Syringe applicator 25 ml

2. Sealant – gasket cement

A viscous and slow drying cement intended primarily for gaskets and

similar. Dries to a pliable ﬁlm.

Part no Pack Quantity

1161099 Plastic container 125 ml

3. Silicon adhesives – black

A single component black silicon adhesive that cures at room tem-

perature. Suitable for both gluing and sealing operations where a

strong elastic seam capable of withstanding temperatures from –65°C

to +200°C is required. Excellent adhesion to metal, rubber, glass and

most plastics. Prior to application, the surface to be treated must be

cleaned and free from moisture. The silicon adhesive is resistant to oils,

greases, solvents, etc.

Part no Pack Quantity

1161277 Plastic tube 20 g

1161231 Plastic cartridge for grease gun 310 ml

4. Sealant

A graphite based black sealant and rust-prooﬁng agent for pipe joints,

ﬂanges, threaded connections on, for example, the exhaust system. Will

not damage gasket materials even at high temperatures.

Part no Pack Quantity

591247 Metal tin 1 kg

ENGINE ACCESSORIES – CHEMICALS44

5 6

3 4

7 8 9 10 11 12 13 14 15

Locking ﬂuid

Protection ﬂuid for screws and nuts. Permits removal in the normal

manner. The protection ﬂuid is effective on lightly oiled surfaces as well

as preventing corrosion, leakage and vibration.

Part no Pack Quantity

1161053 Bottle 10 ml

Coolant system cleaner

High engine temperature can be caused by build-up of deposits in the

cooling system which occur, usually, after long running time or the use

of mineral rich water. When this occurs the cooling system must be

cleaned with the help of a cleaning agent. The cleaner is a citric acid

based solvent with the addition of a neutraliser. For green coolant only.

Part no Pack Quantity

21467920 Plastic container 500 + 200 g