Installation guide

GLOW
ALARM TEST
POWER
ON/OFF
START
140
180
1
2
3
4
5
6
ALARM TEST
INSTR.LIGHT
140
180
1
2
3
4
5
6
14
ALARM TEST
INSTR.LIGHT
100
150
F
200
250
40
80 100
120
0
30
40
90
120
150
0
2
4
6
8
10
psi
8
10
12
16
VOLT
0
S
190
250
1
2
3
4
5
6
7
8
9
22 23MECHANICALLY OPERATED CONTROLS & INSTRUMENTS - INSTRUMENTSMECHANICALLY OPERATED CONTROLS & INSTRUMENTS - INSTRUMENTS
Instrument panel, standard
For either Main control position or Flybridge
installation.
1. Opening for tachometer
2. Alarm buzzer
3. Toggle switch for pre-heater/alarm test
4. Instrument panel lighting ON/OFF switch
5. Start button
6. Warning light panel for:
- coolant temperature
- oil pressure
- battery charging
- pre-heater
Also order cover plate 858648 or tachometer
873992.
Also order cover plate 858648 or tachometer
873992.
Instrument panel, standard
Intended for either Main control position or
Flybridge installation.
1. Opening for tachometer
2. Alarm buzzer
3. Push-button switch for alarm test
4. Push-button switch for instrument panel
lighting
5. Ignition lock
6. Warning light panel for:
- coolant temperature
- oil pressure
- battery charging
- pre-heater
Also order cover plate 858648 or tachometer
873992.
Instrument panel, De Luxe
Intended for either Main control position or
Flybridge installation.
1. Opening for tachometer
2. Coolant temperature gauge
3. Oil pressure gauge
4. Voltmeter
5. Warning light panel for:
- coolant temperature
- oil pressure
- battery charging
- pre-heater
6. Push-button switch for alarm test
7. Push-button switch for instrument panel
lighting
8. Alarm buzzer
9. Ignition lock
Tachometer 873992 should also be ordered.
For double coolant temperature and oil press-
ure gauge installations, new sensors must be
fitted to the engine (this applies to D31-44
engines).
Coolant temp sensor: 840074
Oil pressure sensor: 866836
Flipped Flybridge instrument panel, De Luxe
Excluding instruments, lamps and switches. The same design and
dimensions as 3587074 but in reversed image.
Part no
860184
Toggle switch
Part no
814322
Part no
873286
Alarm panel display
Used when alarm functions are moved from the instrument panel and
separately installed. The panel contains symbols for coolant tempera-
ture, oil pressure, battery charging and pre-heater.
Note! The display panel is merely an empty housing, the required con-
nections, lamps, etc., must be taken from the instrument panel.
Dimensions: 113 x 50 mm
Part no
858876
Part no
873594
Cover plate
To cover the tachometer opening in the instru-
ment panel should a tachometer not be in-
stalled.
Part no
858648
Part no
3587077
Sensor kit for instrument panel,
De Luxe
Only for MD2010, MD2020, MD2030 and
MD2040.
Part no
873569
Part no
3587074
Instrument kit, diesel engines
For custom designed instrument panels intended for
either Main control position or Flybridge installation.
Includes:
Coolant temperature gauge
Oil pressure gauge
Battery charge meter
If required, also order:
Front rings 858643 – 1 per instrument
Mounting brackets 873207 – 1 per instrument
For double coolant temperature and oil pressure gauge
installations, new sensors must be fitted to the engine.
Coolant temp sensor: 840074
Oil pressure sensor: 866836
Instrument installation kit, diesel engines
For custom designed instrument panels intended for either
Main control position or Flybridge installation. One instrument.
Includes: Panel with
Alarm buzzer
Push-button switch for alarm test
Push-button switch for instrument panel lighting
Start button
Stop button
Warning light panel
Cable connections
If required, also order:
Tachometer 873992
Front ring 873517
Mounting bracket 873208
Part no
873582