User Guide

7
FUNCTIONS
+
++++
1
2
3 4 5
109
876
1. Power LED
Red light indicates power on.
2. Input Clip
Input-Clip indicator lights when the PAR-245 is overdriven. With the
source unit at 3/4 full volume, adjust the input sensitivity so that the light
blinks only on very loud material.
3. Volume
Leave the source unit at 3/4 full volume, and use this control as the
Master volume control.
4. Fader
Controls the output level to Front and Rear.
5. Defeat Switch
With the switch in the OUT position, the equalizer controls are bypassed.
Use this switch to compare the sound with and without equalization.
6. Sub
Subwoofer band (30 Hz - 66 Hz) Boost/Cut control.
7. Low
Low band (90 Hz - 300 Hz) Boost/Cut control.
8. Low-Mid
Low Midrange band (430 Hz - 900 Hz) Boost/Cut control.
9. High-Mid
High Midrange band (960 Hz - 4.6 kHz) Boost/Cut control.
10. Treble
Treble band (6 kHz - 16 kHz) Boost/Cut control.
BACK TO CONTENTS