User Guide

6
FUNCTIONS
1. Input
Gold plated RCA inputs. Plug in the RCA cables from the source unit
here.
2. Rear Output
Gold plated RCA outputs. Plug in the RCA cables to your rear channel
amplifier here.
3. Front Output
Gold plated RCA outputs. Plug in the RCA cables to your front channel
amplifier here.
4. LED Select
Push this switch IN for Red Illumination, Leave it OUT for Green.
5. Power
After connecting the Power, Ground and Remote wires, plug in the
PowerLock connector here.
6, 7. Left and Right Input Sensitivity
Sets Left and Right input gain to match the output level from the
source unit. (See Page 8)
8. Frequency Adjust
Set the Frequency/Q combination for each band with these
switches. See the Frequency/Q Selection Codes on pages 14 and 15.
BACK TO CONTENTS