User`s guide

E-Prime User’s Guide
Chapter 2: Using E-Studio
Page 58
After the run is complete, E-Run will return to the window displaying the EBS file, and will display
a dialog indicating the successful termination of the script.
2.10.2 Running on multiple machines
E-Prime must be installed locally in some manner on every machine on which its use is intended.
However, the entire E-Prime system need not be installed on machines to be used only for data
collection. The E-Prime installation includes a Subject Station installation that is approximately
half the size of the full installation. To install the run-time application and only those components
necessary for running pre-generated EBS files, insert the E-Prime CD into the CD-ROM drive to
launch the installation program. During installation, choose the Subject Station option. Repeat
the Subject Station installation on all data collection machines.
It is always a good idea to run an experiment to test that the installation was completed
successfully prior to attempting to run actual subjects. The BasicRT.EBS file is included with the
Subject Station installation for this purpose. Refer to the previous section for information
concerning running an EBS file from E-Run. To run any other EBS file using a Subject Station
machine, simply copy the EBS file (and any other files required by the experiment) to that
machine, load the experiment into E-Run, and click the Run button.