Instruction manual

3.7 VOLTAGE AND CURRENT MONITORS
The V monitor and I monitor each have a ±10 Volt fullscale voltage, which is
proportional to the unit’s output.
The voltage monitor is present at TB1-20, using TB1-24 as common.
The current monitor is present at TB1-19 using TB1-24 as common.
3.8 EXTERNAL INTERLOCK
An external interlock function can be achieved by providing a dry normally open (NO)
contact between TB1-21 and TB1-22 which will cause the front panel circuit breaker to
trip.
Page 13 of 24
83-469-001 Rev. B