User Manual

8
HELIO2
BLENDEr
HELIUM-OXYGEN
WARNING
•
When pressurizing the Blender inlets, avoid pressure surges greater
than 100 psi (6.9 bar).
• Always use a heliox pressure reducing regulator set within 30-75 psi
(2.1-5.2 bar) when using heliox cylinders to supply gas to the Heliox
inlet of the Blender.
• Always use an oxygen pressure reducing regulator set within 30-75
psi (2.1-5.2 bar) when using oxygen cylinders to supply gas to the
Oxygen inlet of the Blender.
EXAMPLE OF SET-UP USING A HELIOX CYLINDER
NOTE: Heliox regulator in use.