User Manual

7
PC Board Replacement (508552):
*Ensure to follow Electrostatic Discharge procedures to avoid damage to electronic components
Tools and equipment required:
• #1 Phillips screwdriver
• Needle nose pliers
Disassembly
1. Follow steps 1 thru 7 of the “General Disassembly” section in this manual.
2. Pull green tubing (506400) o of the boss on the battery separator plate (508539).
3. Remove the 2 screws (508531 & 503956) holding the PC board (508552) onto the top separator plate (508538) and
the battery separator plate (508539).
Green Tubing (506400)
Screw (508531)
PC Board (508552)
Boss
Battery Separator Plate (508539)