User Manual

11
Compressor Replacement (508525):
Tools and equipment required:
• #1 Phillips screwdriver
• Needle nose pliers
• Small diagonal wire cutters
Disassembly
1. Follow steps 1 thru 7 of the “General Disassembly” section in this manual.
2. Remove the screw (503956) holding the PC board (508552) onto the battery separator plate (508539).
3. On the bottom of the PC board, disconnect the wires from the compressor assembly (508525).
PC Board
Compressor Assembly Wires
Battery Separator
Plate (508539)
Screw (503956)