Data Sheet

WWW.PRECISION-DEVICES.COM
+120
+110
+100
+90
+80
+70
+60
+50
dB (1W-1m)
300 500 1k 2k 5k 10k 20k(Hz)
300
100
30
10
5
2
1
Ohms (Ω)
20 50 100 200 500 1k 2k 5k 10k 20k(Hz)
FREQUENCY RESPONSE AND IMPEDANCE CHARTS
1. AES standard practice with high pass filter set at specified lower limiting frequency for two
hours.
2. Sensitivity is measured with applied pink noise RMS Voltage set to 2.83V for nominal 8
ohms impedance and measurement taken at 1 metre from mouth of horn. Average SPL taken
between 2000 to 10000 Hz.
3. Frequency range is defined as measured frequency-10dB to rated sensitivity.
Measurement taken on custom horn.
POWER HANDLING SENSITIVITY (1W/ 1m) FREQUENCY RESPONSE VOICE COIL DIAMETER
© 2016, Precision Devices International Ltd. We operate a policy of continuous research and development and as such published specifications are subject to change without notice.
160516
SOUND CHANNEL / THROAT SIZE
FEATURES:
GENERAL SPECIFICATIONS
Sound Channel / Throat Size 2” / 50.8 mm
Voice Coil Diameter 2.84” / 72.2 mm
Available Impedances 4 Ohm / 8 Ohm / 16 Ohm
Power Rating (above 1kHz)
1
105 W (A.E.S.)
Sensitivity (1W - 1m, on axis, on horn)
2
110 dB
Frequency Range
3
500 Hz - 18 kHz
Recommended Crossover Frequency
(Filtered at 18 dB/ Octave)
1600 Hz
Minimum Impedance 3 kHz - 7.2 Ω
Voice Coil Material Aluminium
Coil Former Material Kapton
Flux Density 1.8 Tesla
Diaphragm Material Titanium
Suspension Material Titanium
Surround / Edge Termination Array
Phase Plug Design 3 Slot
Phase Plug Material Aluminium
Magnet Material Ceramic
Connector Type Push Button Spring Terminals
DIMENSIONS
Overall Diameter 167 mm
Overall Height 67 mm
MOUNTING INFORMATION
Fitting 4 x 6 mm threaded holes @ 180°
Mounting PCD 101.6 mm
WEIGHT
Nett Weight 4.9 Kg / 10.8 lb
Shipping Weight 5.1 Kg / 11.24 lb
•
Hand built, precision machined aluminium phase plug.
• Three slot optimised geometry phase plug design enhances frequency response
and tonal performance.
•
72.2 mm aluminium voice coil utilising high temperature kapton former.
• Pure titanium diaphragm for strength and durability at high SPL oers bright
extended output.
•
Integrate with our bass and mid range drivers to provide the ultimate PD sound
experience.
The PD.CD2 is an ideal driver for professional high performance applications that
can be used in traditional 2-way systems or as part of a larger multi-way long
throw system. The individually precision machined and hand assembled three
slot, optimised geometry phase plug design enhances tonal performance while
minimising sound wave cancellations throughout the working bandwidth.
COMPRESSION DRIVER
PD.CD2
2” / 50.8 mm 105 W (A.E.S.) 110 dB 500 Hz - 18 kHz 2.84” / 72.2 mm
COMPRESSION DRIVER PD.CD2