Use and Care Guide

INSTALL THE FABRIC CAB SKIN TO THE ASSEMBLED FRAME (FIG. 5)

7. Unfold the fabric cab skin [O] and find the pocket sewn into

the top rear part of the cab skin roof. Carefully insert the top

curved section of the assembled front hoop poles into the

pocket on the cab skin. The front hoop poles and roof of

the cab skin will rest on top of the assembled frame

hoop poles. (Fig. 5)

8. Unfold the rest of the cab skin and drape over

the assembled frame as shown.

Fig. 5

Note: The lower front panel features two double zip-

pers that allow convenient pass-through of cables

or linkages if necessary