User's Manual

1.
Connect the wires using a shielded cable. The shielding must be
connected to earth at the access control side of the system.
BioAccess plint 1
1 Do not connect
2 DATA (magstripe) / DATA 0
(Wiegand) OUTPUT
3 CLOCK (magstripe) / DATA 1
(Wiegand) OUTPUT
4 CARD PRESENT OUTPUT
5 RS485 B
6 RS485 A
7 ground
8 Extra ground
9 Extra ground
10 POWER 12-24 VDC
BioAccess plint 2
1 Do not connect
2 Do not connect
3 Do not connect
4 Do not connect
5 RS232 Out
6 RS232 In
7 Do not connect
8 Do not connect
9 Do not connect
10 Do not connect