User's Manual

Sweden USA
Precise Biometrics AB Precise Biometrics Inc.
Scheelevägen 19 C, SE-223 70 Lund 8300 Boone Boulevard, Suite 500, Vienna, VA 22182
Phone: [phone], Fax [phone] Phone: [phone], Fax [phone]
Support: [e-mail]
Support: [e-mail]
Info: [e-mail]
Info: [e-mail]
Maintaining the Precise 200 series reader
• Protect the Precise 200 series reader from any kind of physical damage.
• Ensure that you are electrostatic discharged before putting the finger on the sensor. High electrostatic discharges might
damage the fingerprint sensor.
• Keep the sensor surface clean or there is an increased risk that the fingerprint can’t be successfully matched.
• If necessary, clean the surface with a clean cotton cloth. You can dampen the cloth slightly with a cleaner.
• Do not use paper tissues for cleaning purposes, because they may scratch the surface.
• Do not spray cleaner directly onto the fingerprint reader.
• Do NOT use chlorine-based cleaners, non-chlorine bleach, or chlorine-based bathroom or mildew cleaners.
• Do NOT use any solvents, such as acetone, paint thinners, turpentine etc.
Product Warranty information
Please be informed that this Precise 200 series reader is covered by a limited product warranty pursuant to which this Precise 200 series reader will be
free from defects in design, materials and workmanship for a period of twelve (12) months from the time of delivery from Precise Biometrics to the
Precise Biometrics partner from which you purchased this Precise 200 series reader (the “Partner”). In case of a defect covered by the warranty, the
defective unit shall be returned to the Partner, who will procure that the defective unit is repaired or replaced.
THE ABOVE PARAGRAPH IS AN EXTRACT OF THE STANDARD PRECISE BIOMETRICS LIMITED PRODUCT WARRANTY, AND
SHALL NOT BE CONSIDERED OR CONSTRUED AS AN INDEPENDENT WARRANTY STATEMENT. FOR THE COMPLETE
WARRANTY CONDITIONS, WARRANTY LIMITATIONS, CUSTOMER RESPONSIBILITIES AND OTHER TERMS AND CONDITIONS,
PLEASE CONTACT THE PARTNER.
Electromagnetic compatibility (EMC) Notices
Electromagnetic compatibility (EMC) is the ability of electronic equipment to function properly together in the electronic environment.
CE Notice (Europe)
The Precise 200 series readers, Precise 200 MC and Precise 250 MC meet the following technical standards:
• EN 55022:1994 Limit B (Radiated emission)
• EN 55024:1998 (Immunity of IT-equipment)
FCC Information (USA)
The Precise 200 MC and Precise 250 MC devices have been certified to the Class B digital device requirements as specified in the FCC rules and
regulations (CFR47 Part 15 Subpart B).
The Precise 200 MC and Precise 250 MC devices complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1)
this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause
undesired operation.
NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These
limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can
radiate radio frequency energy and, if not in-stalled and used in accordance with the instructions, may cause harmful interference to radio
communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful
interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the
interference by one or more of the following measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.
CAUTION: Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the
equipment.
General Information and Contacts
The information in this Quick Reference is protected by copyright and may not be reproduced in any form without written consent
from Precise Biometrics. The information in this Quick Reference is subject to change without notice. Precise Biometrics shall not be
liable for any technical or editorial errors herein, nor for incidental or consequential damages resulting from the use of this Quick
Reference. Precise Biometrics publishes this Quick Reference without warranty. Copyright © Precise Biometrics, 2005
www.precisebiometrics.com
P/N: AM010044 R1A