User Manual

14
5. Connect the keyboard/mouse PS/2 connector to the pass-through PS/2
connector.
6. Power on the computer.
Continue with the next step – Installing the Fingerprint Identification Software.
Installing the Fingerprint
Identification Software
NOTE: Only users with administrator rights can install the software.
The fingerprint identification software, Precise 100 Logon 2.1, is needed to read your fin-
gerprints and to save and retrieve information about your fingerprints, accessible
domains, etc.
During installation you may be instructed to restart your computer before continuing to the
next step in the installation procedure. If the Master Setup screen does not appear auto-
matically after restart, start the CD from your desktop by double-clicking My Computer >
CD > MasterSetup.exe icon.
NOTE: Once the software is installed, you will be able to register fingerprints using the
BioManager for Domains (see The BioManager for Domains chapter for details) and store
them locally if you log on as administrator on your local workstation. However, that will
not grant access to domain server accounts. To be able to log into a domain server
account using your fingerprint, your fingerprint will have to be registered and stored on
the domain server.
When the fingerprint identification software is installed on your local computer, you can
use Personal Enrolment to register your fingerprints on the domain server. See the Personal
Enrolment chapter for details.
Chapter 2 InstallationChapter 2 Installation