User's Guide

41
The Verify Fingerprint screen appears. Your primary logon finger will be selected.
2. Make sure the Username and Domain are correct, in other words, that it is your
card.
3. Place your finger pad (the area of your finger containing the fingerprint) on the
fingerprint reader sensor. The yellow light starts flashing.
NOTE: To place another finger on the sensor, select that finger on the Verify Fingerprint
screen – you must of course have more than one of your fingerprints stored on the smart
card.
4. Keep the finger placed on the sensor until the yellow light ceases to flash
The system verifies your fingerprint and access rights for the selected domain and displays
the Windows desktop.
If the logon fails, try lifting your finger and putting it back on the sensor again. Try adjust-
ing the position of your finger. If you still can not log on, see Fingerprint and Smart Card
Troubleshooting in the Troubleshooting chapter.
Chapter 5 Logging on