User's Guide

5. Connect the keyboard/mouse PS/2 connector to the pass-through PS/2

connector.

6. Power on the computer.

Continue with next step – Installing the Fingerprint Identification Software.

Installing the Fingerprint

Identification Software

NOTE: Only users with administrator rights can install the software.

The fingerprint identification software, Precise 100 Client, is needed to read your finger-

prints and to save and retrieve information about your fingerprints, accessible domains,

etc.

During installation you may be instructed to restart your computer before continuing to the

next step in the installation procedure. If the Master Setup screen does not appear auto-

matically after restart, start the CD from your desktop by double-clicking My Computer >

CD > MasterSetup.exe icon.

NOTE: Once the software is installed, you will be able to register fingerprints using the

BioManager (see The BioManager chapter for details) and store them locally if you log

on as administrator on your local workstation. However, that will not grant access to

domain server accounts. To be able to log into a domain server account using your fin-

gerprint, your fingerprint will have to be registered and stored on the domain server.

When the fingerprint identification software is installed on your local computer, see a

domain administrator to register your fingerprints on the domain server.

Chapter 2 InstallationChapter 2 Installation