User's Manual

2.3 How to install
1. Install the Precise Sense™ series
drivers.
Run the setup le in the Precise Sense™
series drivers package or follow
installation instructions in the application
that bundles the Precise Sense™ series
drivers.
2. Connect the reader
Connect the Precise Sense™ reader to the
USB port on the computer and the
reader is ready to be used.
3. Maintenance
• Protect the Precise Sense™ series reader
from any kind of physical damage.
• Ensure that you are electrostatically
discharged before putting the nger on
the sensor. High electrostatic discharges
might damage the ngerprint sensor.
• Keep the sensor surface clean or there
is an increased risk that the ngerprint
can’t be successfully matched.
• If necessary, clean the sensor surface
with a clean cotton cloth. You can
dampen the cloth slightly with a cleaner.
• Do not use paper tissues for cleaning
purposes as they may scratch
the surface.
• Do not spray cleaner directly onto the
ngerprint reader.
• Do NOT use chlorine-based cleaners,
non-chlorine bleach, or chlorine-based
bathroom or mildew cleaners.
• Do NOT use any solvents, such as
acetone, paint thinners, turpentine etc.