Application Guide

Safety Instructions
For your protection
• Read the operating instructions in full before starting up
and follow the safety instructions when in use.
• Ensure that only trained staff work with the device.
• Socket must be earthed (protective ground contact)
• Caution-Magnetism! Effects of the magnetic field have to be
taken in to account (e.g. data storage media, cardiac
pacemakers…).
• The heating plate can reach temperatures of 310°C and pay
attention to the residual heat after switching off.
• The main power supply cable should not touch the heating plate.
• Wear your personal protective equipment in accordance with
the hazard category of the media to be processed. Otherwise
there is a risk from:
- Splashing and evaporation of liquids
- Ejection of parts
- Release of toxic or combustible gases
• Set up the device in a spacious area on an even, stable, clean,
nonslip, dry and fireproof surface.
• Don’t use damaged components.
• Gradually increase the speed and reduce the speed if
- the medium splashes out of the container because the
speed is too high
- the machine is not running smoothly
- the container moves on the heating plate
• Caution! Only process and heat up any media that has a flash
point higher than the adjusted safe temperature limit that has
been set.
• The safe temperature limit must always be set to at least 50°C
lower than the fire point of the media used.
• Beware of hazards due to:
2