Manual

Appendix B: Troubleshooting and Support iPocket232 User Guide
B-6 Precidia Technologies Inc. 23-CML000293
ETHERNET – TRANSMIT lamp
Flashes when the iPocket232 is sending or receiving data via the Ethernet port.
Normally you will see very short data bursts.
SERIAL – TRANSMIT lamp
Illuminates when the iPocket232 is sending or receiving data via the serial port
Normally you will see very short data bursts.
Table B.3: TRANSMIT Lamp Troubleshooting
Lamp Status Standard Troubleshooting Procedure
Flash-
ing
OK - data is
being trans-
mitted
None
Off No data is
being trans-
mitted
Ensure the Ethernet cable between the iPocket232
and the Ethernet device is properly connected
Table B.4: SERIAL TRANSMIT Lamp Troubleshooting
Lamp Status Standard Troubleshooting Practice
On OK - In config-
uration mode
Finish configuring the iPocket232 and exit
from configuration mode.
Flash-
ing
OK - data is
being trans-
mitted
None
Off No data is
being trans-
mitted
• Ensure the serial cable between the
iPocket232 and the serial device is prop-
erly connected
• Was the configuration recently changed?
Look at the System Status page to check
the system uptime. If it is a short period,
check the configuration of the iPocket232
to see if it has been modified recently.
Please refer to Sections 3 and 4 for further
information.