Manual

iPocket232 User Guide Appendix B: Troubleshooting and Support
23-CML000293 Precidia Technologies Inc. B-5
Indicator Lamps (LEDs)
ETHERNET – LINK lamp
Illuminates when the Ethernet port has a 10BaseT Ethernet network connection.
I lost the Console Password and I cannot
access Configuration
1 If you have defined a Remote Password, access
the unit through telnet and view or change the
Console Password
2 See page 14 of the User Guide for instructions on
how to reset the entire configuration to factory
default settings, erasing all passwords
I lost the Console Password and I cannot
access Configuration
1 If you have defined a Remote Password, access
the unit through telnet and view or change the
Console Password
2 See page 14 of the User Guide for instructions on
how to reset the entire configuration to factory
default settings, erasing all passwords
Table B.1: Basic Troubleshooting
Problem Solution
Table B.2: LINK Lamp Troubleshooting
Lamp Status Standard Troubleshooting Procedure
On OK - Ethernet
connection in
place
None
NOTE: This light may be on if the iPocket232 is
not configured.
Off No Ethernet
connection
• Ensure the Ethernet cable is properly plugged
into the iPocket232.
• Ensure the Ethernet cable's opposite end is
properly plugged into your LAN hub.
NOTE: The hub also has Link lamps that will
provide further troubleshooting information.