Manual

iPocket232 User Guide 7 Accessing System Information
23-CML000293 Precidia Technologies Inc. 63
Connection was not from config-
ured remote address - refused
The incoming connection attempt was not
from the IP address configured as the
Remote IP.
Port #n: Connection reset by
remote host at
xxx.xxx.xxx.xxx:pppp
The remote host forcibly terminated the
active TCP session with the unit.
Port #n: Connection closed by
remote host at
xxx.xxx.xxx.xxx:pppp
The remote host is taking the steps to cor-
rectly close the TCP session with the unit.
Port #n: Connection closed by us
to host at xxx.xxx.xxx.xxx:pppp
The unit is taking the steps to correctly close
the TCP session with the remote host.
HTTP: host at xxx.xxx.xxx.xxx
failed to authenticate properly.
The remote host attempted unsuccessfully to
access the userid/password protected HTTP
pages. Internet Explorer may attempt access
using old data from previous connections,
resulting in this error.
Configuration changes saved --
restarting system
A configuration change was saved. Unit
resets.
Port #n: Listening for connections
on tcp port pppp was not possible
(Error #nn)
The unit cannot listen on the specified port.
Table 7.4 lists possible error codes.
Port #n: Connection attempt to
xxx.xxx.xxx.xxx:pppp was not
possible (Error #nn)
The unit could not connect to the specified IP
address and port number. Table 7.4 lists pos-
sible error codes.
Port #n: Incoming connection on
tcp port pppp from
xxx.xxx.xxx.xxx:pppp (Error #nn)
The unit could not accept the incoming con-
nection. Table 7.4 lists possible error codes.
Incoming connection on tcp port
held waiting for connection control
The connection control setting dictates that
the incoming connection not be established
until the connection control signals are
matched.
Connection with xxx.xxx.xxx.xxx
stopped due to connection control
The connection control setting and signal
lines dictate that the session being estab-
lished no longer become established.
Connection with xxx.xxx.xxx.xxx
dropped due to connection control
The connection control setting and signal
lines dictate that the session that was estab-
lished be dropped.
Table 7.3: System Log Messages
Message Description