Manual

7 Accessing System Information iPocket232 User Guide
62 Precidia Technologies Inc. 23-CML000293
TELNET: login from
xxx.xxx.xxx.xxx rejected (config-
uration already running)
The unit went into telnet configuration
mode, a password prompt was given, and the
correct password was entered, but configura-
tion was already running (probably locally
through the COM port).
TELNET: login from
xxx.xxx.xxx.xxx accepted
The unit went into telnet configuration
mode, a password prompt was given, and the
correct password (configured Remote Pass-
word) was entered.
TELNET: login from
xxx.xxx.xxx.xxx rejected (time-
out)
The unit went into telnet configuration
mode, a password prompt was given, and the
correct password was entered, but no
response was input within the 30 second tim-
eout period. Unit does not reset.
TELNET: login from
xxx.xxx.xxx.xxx rejected (invalid
password)
The unit went into telnet configuration
mode, a password prompt was given, but the
password entered did not match the config-
ured Remote Password. Unit does not reset.
Port #n: Listening for connection
on tcp port pppp...
The unit will allow incoming TCP connec-
tions on port pppp.
Port #n: Connection attempt to
xxx.xxx.xxx.xxx:pppp...
The unit is contacting the remote server at
the IP address and port indicated.
Port #n: Incoming connection on
tcp port pppp from
xxx.xxx.xxx.xxx:pppp
The unit has detected an incoming communi-
cation from the remote host indicated on port
pppp.
Port #n: Connection was estab-
lished with xxx.xxx.xxx.xxx:pppp
The unit has established a TCP connection
with the remote host indicated on port pppp.
Port #n: No response connecting
to host at xxx.xxx.xxx.xxx:pppp
The remote host has not responded to any
TCP session establishment requests.
Port #n: No response from host at
xxx.xxx.xxx.xxx:pppp
The remote host is no longer responding to
TCP traffic (after it had previously been
responding).
Port #n: Connection was refused
by xxx.xxx.xxx.xxx:pppp...
The remote host actively refused a connec-
tion request from the unit.
Table 7.3: System Log Messages
Message Description