Manual

iPocket232 User Guide 7 Accessing System Information
23-CML000293 Precidia Technologies Inc. 61
To access the System Log in configuration mode:
1 Access the iPocket232 Configuration screen either locally or remotely.
2 Choose System Settings from the Device Settings menu.
3 Choose Dump System Log from the System Settings sub-menu.
Understanding the System Log
Table 7.3 describes System Log messages you may see when performing a System
Log dump, and Table 7.4 lists possible error messages and what to do about them:
Table 7.3: System Log Messages
Message Description
====iPocket232 Started====
The unit has been started by: plugging in the
power adapter, saving a new configuration,
timing out during local configuration, exiting
configuration without saving, or choosing
Reset Unit from the System Settings menu.
No timestamp presented. This message indi-
cates the unit was started in normal mode.
Timestamp will start counting from zero (0)
after this message.
iPocket232 Log Deleted
The iPocket232 had its log deleted. If
present, this message will always be the first
entry in the log.
CONSOLE: login accepted
The unit went into console configuration
mode, a password prompt was given, and the
correct password was entered.
CONSOLE: login rejected (time-
out)
The unit went into console configuration
mode, a password prompt was given, but no
response was input within the 30 second tim-
eout period. Unit resets.
CONSOLE: login rejected (invalid
password)
The unit went into console configuration
mode, a password prompt was given, but the
password entered did not match the config-
ured Console Password. Unit resets.