Manual

iPocket232 User Guide 6 System Settings
23-CML000293 Precidia Technologies Inc. 51
6.4 Display System Status
The System Status page allows you to view useful statistics about the unit. This infor-
mation includes system uptime, activity through the serial port (Port #1), and network
port settings. The System Status page displays the same information as the Status Web
page.
You can easily determine the IP address of the unit through the System Status page,
even if it is dynamically allocated. The first Local address listed under Network
Routing is the IP address of the unit.
Choose Display System Status from the System Settings sub-menu.
The status information appears, an example of which is shown below.
See Section 7.1, System Status‚ on page 57, for a description of the System Status
page.
6.5 Dump System Log
Dump System Log allows you to review all activity that has occurred on the
iPocket232 since it was configured, or since the Delete System Log option was used.
The dump may require a few minutes to complete.
The System Log is a wrapping buffer up to 64 KB. It will never run out of memory, but
will write over the earlier messages once the buffer fills up. See Section 7.2, System
Log‚ on page 60, for a description of the log information.
iPocket232 Status:
System Uptime
Up 0 days, 0:13:48
Load Average: 5sec=17% 30sec=24% 5min=19% 30min=4%
Firmware Revision: 4.03.00 (2003-04-17)
Port #1 [null] (terminated/tcp-client, connected)
Received Transmitted
Bytes: 77461 Bytes: 10242
Packets: 158 Packets: 195
Avg-BpP: 490 Avg-BpP: 53
Network Routing
Local Network Subnet Mask Gateway Iface Pkts-In Pkts-Out
Pkts-Err
192.168.1.18 192.168.1.0 255.255.255.0 eth 585 451 1
127.0.0.1 127.0.0.0 255.0.0.0 lo 0 0 0
Please hit <return>:
Example of the System Status Page