Manual

23-CML000293 Precidia Technologies Inc. 49
6 System Settings
The System Settings should only be configured by network administrators or
advanced users who need to upgrade the firmware or view log information.
To configure or change the System Settings, select System Settings from the Device
Settings
menu.
The System Settings sub-menu appears on the right side of the Configuration screen,
as shown below.
NOTE: Remember to save your changes by typing "*" to exit configuration!
6.1 Unit ID Value
Unit ID Value is the hardware address of the iPocket232 and cannot be changed. It is
assigned at the factory and printed below the barcode on the bottom of the iPocket232.
,-----------------------------------------------------------------------------.
| Precidia iPocket232 Configuration v4.03.00 |
|-----------------------------------------------------------------------------|
| Device Settings: | System Settings: |
| | |
| 1) Ethernet: 192.168.1.25 | A) Unit ID value: 00:01:1E:87:47:48 |
| | |
| 2) Serial Port: Transparent | B) Web Page Download: (none) |
| | C) Firmware Download: 2003-09-23 |
| | |
| | D) Display System Status |
| | E) Dump System Log (long) |
| | F) Delete System Log |
| *) Save Current Configuration | |
| -) Exit Configuration (no save) | G) Perform Self Test |
| $) Security Settings | H) Reset Unit |
| #) System Settings | |
| ?) Refresh this Screen | I) SNTP Settings |
`-----------------------------------------------------------------------------'
Change which option?
System Settings Sub-menu