Manual

5 Configuring the Security Settings iPocket232 User Guide
42 Precidia Technologies Inc. 23-CML000293
3 Do not type any characters. Press ESC to keep the same password and return to the
menu.
Clearing the Access Password
1 Choose Security Settings from the Device Settings menu.
2 Choose Access Password from the Security Settings sub-menu.
3 Do not type any characters. Press Enter to clear the password.
The password is displayed as (not set) in the Security Settings sub-menu.
5.6 SNMP Server
The SNMP Server enables or disables the SNMP function in the iPocket232. The
default setting is “enabled”.
To enable or disable the SNMP Server:
1 Choose Security Settings from the Device Settings menu.
2 Choose SNMP Server from the Security Settings sub-menu.
You are prompted to enable or disable the SNMP Server, as shown below.
3 Type the letter that corresponds to the desired setting and press Enter.
5.7 SNMP Settings
Precidia products support SNMPv2c. SNMP (Simple Network Management Protocol)
is a protocol for viewing network statistics and settings. An SNMP management
system consists of a manager (remote) and an agent (Precidia device) using UDP as
the communication protocol.
The Precidia SNMP agent supports MIB-II, and allows GET (read) commands for
gathering information, SET (write) commands for managing how the information is
gathered, and trap (notification) generation for alerting the Network Manager when
selected or unusual events occur.
The SNMP server allows access to many internal statistics as well as the values
seen in the system status page.
A. enabled B. disabled
Choose desired setting or press ESC to cancel:
SNMP Server Options