Manual

5 Configuring the Security Settings iPocket232 User Guide
40 Precidia Technologies Inc. 23-CML000293
2 Choose Remote Password from the Security Settings sub-menu.
You are prompted to enter a remote access password with a maximum of 8 charac-
ters.
3 Do not type any characters. Press Enter to clear the password.
The password is displayed as (not set) in the Security Settings sub-menu.
5.3 Web Server
The default setting is <enabled>.
The Web Server enables or disables access to the Web, Status and System Log pages
stored in the unit. The pages are accessible through your Web browser, and are
described in Section 7, Accessing System Information‚ on page 57.
If enabled, you can also define the Access Userid and Password to restrict access to the
Status and System Log pages.
IMPORTANT! If enabled, but you do not configure the Access Userid and Access
Password (default), anyone who knows the IP address of the unit can access the pages
through a Web browser.
NOTE: HTTP authentication schemes for passing the user ID and password to the
HTTP daemon include Basic and Digest Access Authentication. Most Web browsers
support one or both authentication schemes and should function correctly. Update
your browser if problems occur.
To enable or disable the
Web Server:
1 Choose
Security Settings from the Device Settings menu.
2 Choose
Web Server from the Security Settings sub-menu.
You are prompted to enable or disable the Web Server, as shown below.
The web server allows access to the set of static pages loaded in to the unit
(see the system menu) and to the various dynamic pages such as system status
and system log.
A. enabled B. disabled
Choose desired setting or press ESC to cancel:
Web Server Options