Manual

iPocket232 User Guide 5 Configuring the Security Settings
23-CML000293 Precidia Technologies Inc. 39
5.2 Remote Password
To remotely configure the iPocket232, you must first set the Remote Password
through local configuration. This is a security option to disable unauthorized remote
access. Appendix D: Connecting with Telnet describes how to remotely telnet into the
iPocket232.
NOTE: Unless you set a remote password, you will not be able to telnet to the
iPocket232 for configuration, or perform remote firmware and Web page downloads.
Setting the Remote Password
NOTE: Passwords are case sensitive and can consist of uppercase letters, lowercase
letters, numbers, or symbols.
1 Choose
Security Settings from the Device Settings menu.
2 Choose Remote Password from the Security Settings sub-menu.
You are prompted to enter a remote access password with a maximum of 8 charac-
ters.
3 Type your password (appears as a series of asterisks(*) on the screen) and press
Enter.
Viewing the Remote Password
1 Choose
Security Settings from the Device Settings menu.
2 Choose Remote Password from the Security Settings sub-menu.
The current password is displayed in brackets: [was: password].
3 Do not type any characters. Press ESC to keep the same password and return to the
menu.
Clearing the Remote Password
NOTE: Clearing the Remote Password disables remote access to configuration
through telnet.
1 Choose
Security Settings from the Device Settings menu.