Manual

iPocket232 User Guide 1 Before You Start
23-CML000293 Precidia Technologies Inc. 5
.
1.4 Hardware Requirements
Equipment Included
The following items are included with your iPocket232 device:
• one (1) iPocket232 device
• one (1) power adapter
• one (1) mounting bracket
Additional Equipment Needed for Installation
To complete the hardware installation, you will need the iPocket232 package, along
with the following equipment:
• one (1) PC with terminal software, or a dumb terminal for configuration
• one (1) Ethernet cable for your network connection.
• If you are connecting the iPocket232 to a DTE (Data Terminal Equipment) device,
or as a modem replacement:
- one (1) RS-232 serial cable for configuration and operation
Table 1.2: Connectors
Port Location Description
CONFIG Top of unit
Activates local configuration through the serial
port. (To activate, press and hold the recessed
CONFIG button for several seconds using a ball
point pen or similar object.)
ETHERNET Top of unit
Accepts RJ-45 connector for direct connection
to 10BaseT Ethernet network.
NOTE: If connecting directly to another Ether-
net device, use a cross-over cable. If connecting
to a 100BaseT network, your hub must support
automatic switching to 10BaseT.
POWER Top of unit
Accepts the Precidia-supplied 9V power adapter.
SERIAL Bottom of
unit
Accepts DB-9 serial cable for operation and con-
figuration.