Datasheet

Dual-in-line sockets
Open frame
Solder tail
Ordering information
PP Plating code Sleeve Clip
97 Tin Gold flash
91 Tin Gold 0.25 µm
93 Tin Gold 0.75 µm
99 Tin Tin
Other plating on request see page
146 for plating specs
Open frame standard low profile DIL Sockets
Technical Specs:
Insulator: Black glass filled polyester PBT-GF30-FR
Flammability: UL 94V-O
Sleeve: Brass CuZn36Pb3 (C36000)
Contact clip (4 finger): Beryllium copper (C17200)
Accepted pin Ø: 0.40 to 0.56 mm
Forces: (polished steel gauge Ø 0.43 mm)
– Insertion 2 N typ.
– Withdrawal 1 N typ.
Mechanical life: min 100 cycles
Rated current: 1 A
Contact resistance: max 10 mΩ
Dielectric strength: min 1000 V RMS
Options
1 Insulators without center bar *
Open frame insulators 318, 320, 322, 324, 624, 628, 632, 640
and 648 available on special request without center bars; add
suffix 051 to the part number. Example 110-93-628-41-001001
becomes 110-93-628-41-001
051
2 Sockets with increased solder tail length of 4.2 mm
allowing aplication on multilayer PCBs up to 3.4 mm
thickness replace
110-..-...-..-...... by 111-..-...-..-......
3 Sockets with soft brass pin series 110-..-...-..-005001,
please consult
4 For DIL Sockets with closed frame insulators replace
110-...
by 210-... Please consult for available pin numbers
No. of See
poles
A
B C
page 100
Order Codes
10 12.6 5.08 7.6 Fig. 1 110-PP-210-41-001001
4 5.0 7.62 10.1 Fig. 2 110-PP-304-41-001001
6 7.6 7.62 10.1 Fig. 3 110-PP-306-41-001001
8 10.1 7.62 10.1 Fig. 4 110-PP-308-41-001001
10 12.6 7.62 10.1 Fig. 5 110-
PP-310-41-001001
12 15.2 7.62 10.1 Fig. 6 110-
PP-312-41-001001
14 17.7 7.62 10.1 Fig. 7 110-
PP-314-41-001001
16 20.3 7.62 10.1 Fig. 8 110-
PP-316-41-001001
18* 22.8 7.62 10.1 Fig. 9 110-
PP-318-41-001001
20* 25.3 7.62 10.1 Fig. 10 110-
PP-320-41-001001
22* 27.8 7.62 10.1 Fig. 11 110-
PP-322-41-001001
24* 30.4 7.62 10.1 Fig. 12 110-
PP-324-41-001001
28 35.5 7.62 10.1 Fig. 13 110-
PP-328-41-001001
20
25.4 10.16 12.6 Fig. 14 110-PP-420-41-001001
22 27.8 10.16 12.6 Fig. 15 110-
PP-422-41-001001
24 30.4 10.16 12.6 Fig. 16 110-
PP-424-41-001001
28 35.5 10.16 12.6 Fig. 17 110-
PP-428-41-001001
32 40.6 10.16 12.6 Fig. 18 110-
PP-432-41-001001
10
12.7 15.24 17.7 Fig. 19 110-PP-610-41-001001
24* 30.5 15.24 17.7 Fig. 20 110-
PP-624-41-001001
28* 35.5 15.24 17.7 Fig. 21 110-
PP-628-41-001001
32* 40.6 15.24 17.7 Fig. 22 110-
PP-632-41-001001
36 45.7 15.24 17.7 Fig. 23 110-
PP-636-41-001001
40* 50.8 15.24 17.7 Fig. 24 110-
PP-640-41-001001
42 53.3 15.24 17.7 Fig. 25 110-
PP-642-41-001001
48* 60.9 15.24 17.7 Fig. 26 110-
PP-648-41-001001
50 63.5 15.24 17.7 Fig. 27 110-
PP-650-41-001001
52 66.0 15.24 17.7 Fig. 28 110-
PP-652-41-001001
50
63.5 22.86 25.3 Fig. 29 110-PP-950-41-001001
52 66.0 22.86 25.3 Fig. 30 110-
PP-952-41-001001
64 81.2 22.86 25.3 Fig. 31 110-
PP-964-41-001001
101
PRECI-DIP DURTAL SA CH-2800 Delémont / Switzerland
Phone ++41 32 421 04 00 Fax ++41 32 421 04 01 [e-mail]
Due to technical progress, all the information provided is subject to change without prior notice
Series
110
DIL Sockets