Datasheet

TO sockets
Solder tail
Surface mount
Ordering information
PP Plating code Sleeve Clip
93 Tin Gold 0.75 µm
Other plating on request see page
146 for plating specs
Sockets for packages with contacts arranged on “200” (5.08
mm) and “230” (5.84 mm) diameter acc. to JEDEC TO-Series
outlines
Technical Specs:
Insulator: Black glass filled polyester PBT-GF30-FR
(PCT-GF30-FR for SMD sockets)
Flammability: UL 94V-O
Sleeve: Brass CuZn36Pb3 (C36000)
Contact clip (4 finger): Beryllium copper (C17200)
Accepted pin Ø: 0.40 to 0.56 mm
Forces: (polished steel gauge Ø 0.43 mm)
– Insertion 2 N typ.
– Withdrawal 1 N typ.
Mechanical life: min 100 cycles
Rated current: 1 A
Contact resistance: max 10 mΩ
Dielectric strength: min 1000 V RMS
No. of
poles
A
B See
Order Codes
3 10.0 5.08 Fig. 3 917-PP-103-41-005001
4 10.0 5.08 Fig. 4 917-PP-104-41-005001
8 10.0 5.08 Fig. 5 917-PP-108-41-005001
8 10.0 5.84 Fig. 6 917-PP-208-41-005001
10 10.0 5.84 Fig. 7 917-
PP-210-41-005001
Sockets, solder tail, Fig. 1
Fig. 1
Fig. 3 Fig. 4 Fig. 5 Fig. 6 Fig. 7
Fig. 2
No. of
poles
A
B See
Order Codes
3 10.0 5.08 Fig. 3 917-PP-103-41-053101
4 10.0 5.08 Fig. 4 917-PP-104-41-053101
8 10.0 5.08 Fig. 5 917-PP-108-41-053101
8 10.0 5.84 Fig. 6 917-PP-208-41-053101
10 10.0 5.84 Fig. 7 917-
PP-210-41-053101
Sockets, SMD mount, Fig. 2
121
PRECI-DIP DURTAL SA CH-2800 Delémont / Switzerland
Phone ++41 32 421 04 00 Fax ++41 32 421 04 01 [e-mail]
Due to technical progress, all the information provided is subject to change without prior notice
Series
917
DIL Sockets
See
page 99
T & R Packaging