Datasheet

Dual-in-line pin carrier
Assemblies
Low profile / low profile ultra thin
Solder tail
Easy mounting due to the disposable plastic carrier. No
solder or flux wicking problems
Technical Specs:
Insulator: Black glass filled polyester PBT-GF30-FR
Flammability: UL 94V-O
Sleeve: Brass CuZn36Pb3 (C36000)
Contact clip (4 finger): Beryllium copper (C17200)
(3 finger Series 614…012001)
Accepted pin Ø: 0.40 to 0.56 mm
Forces: (polished steel gauge Ø 0.43 mm)
– Insertion 2 N typ. (1.0 N typ. 614…012001)
– Withdrawal 1 N typ. (0.4 N typ. 614…012001)
Mechanical life: min 100 cycles
Rated current: 1 A
Contact resistance: max 10 mΩ
Dielectric strength: min 1000 V RMS
Ordering information
PP Plating code Sleeve Clip
91 Tin Gold 0.25 µm
Other plating on request see page
146 for plating specs
For complete part number replace
X-...-XX-XXX with the code
given below left
Available versions
- Standard carrier
612…-41-001001
see Fig. 1
- Low profile
614…-41-001001
see Fig. 2 for PCB hole Ø 1.4-1.8 mm
- Low profile, ultra thin
614…-31-012001
see Fig. 3 for PCB hole Ø 1.0-1.3 mm
No. of See
poles
A
B C
page 100
Order Codes
10 12.6
5.08 7.6 Fig. 1 61X-PP-210-XX-XXX001
4 5.0 7.62 10.1 Fig. 2 61X-PP-304-XX-XXX001
6 7.6 7.62 10.1 Fig. 3 61X-PP-306-XX-XXX001
8 10.1 7.62 10.1 Fig. 4 61X-PP-308-XX-XXX001
10 12.6 7.62 10.1 Fig. 5 61
X-PP-310-XX-XXX001
12 15.2 7.62 10.1 Fig. 6 61
X-PP-312-XX-XXX001
14 17.7 7.62 10.1 Fig. 7 61
X-PP-314-XX-XXX001
16 20.3 7.62 10.1 Fig. 8 61
X-PP-316-XX-XXX001
18 22.8 7.62 10.1 Fig. 9 61
X-PP-318-XX-XXX001
20 25.3 7.62 10.1 Fig. 10 61
X-PP-320-XX-XXX001
22 27.8 7.62 10.1 Fig. 11 61
X-PP-322-XX-XXX001
24 30.4 7.62 10.1 Fig. 12 61
X-PP-324-XX-XXX001
28 35.5 7.62 10.1 Fig. 13 61
X-PP-328-XX-XXX001
20
25.4 10.16 12.6 Fig. 14 61X-PP-420-XX-XXX001
22 27.8 10.16 12.6 Fig. 15 61
X-PP-422-XX-XXX001
24 30.4 10.16 12.6 Fig. 16 61
X-PP-424-XX-XXX001
28 35.5 10.16 12.6 Fig. 17 61
X-PP-428-XX-XXX001
32 40.6 10.16 12.6 Fig. 18 61
X-PP-432-XX-XXX001
10
12.7 15.24 17.7 Fig. 19 61X-PP-610-XX-XXX001
24 30.5 15.24 17.7 Fig. 20 61
X-PP-624-XX-XXX001
28 35.5 15.24 17.7 Fig. 21 61
X-PP-628-XX-XXX001
32 40.6 15.24 17.7 Fig. 22 61
X-PP-632-XX-XXX001
36 45.7 15.24 17.7 Fig. 23 61
X-PP-636-XX-XXX001
40 50.8 15.24 17.7 Fig. 24 61
X-PP-640-XX-XXX001
42 53.3 15.24 17.7 Fig. 25 61
X-PP-642-XX-XXX001
48 60.9 15.24 17.7 Fig. 26 61
X-PP-648-XX-XXX001
50 63.5 15.24 17.7 Fig. 27 61
X-PP-650-XX-XXX001
52 66.0 15.24 17.7 Fig. 28 61
X-PP-652-XX-XXX001
50
63.5 22.86 25.3 Fig. 29 61X-PP-950-XX-XXX001
52 66.0 22.86 25.3 Fig. 30 61
X-PP-952-XX-XXX001
64 81.2 22.86 25.3 Fig. 31 61
X-PP-964-XX-XXX001
115
PRECI-DIP DURTAL SA CH-2800 Delémont / Switzerland
Phone ++41 32 421 04 00 Fax ++41 32 421 04 01 [e-mail]
Due to technical progress, all the information provided is subject to change without prior notice
Series
612
614
Fig. 1
Fig. 2
Fig. 3
DIL Sockets