Datasheet

Dual-in-line sockets
Interconnect
Open frame
Solder tail
For mechanical and electrical interconnection, PCB stacking
or elevated positioning of display modules
Technical Specs:
Insulator: Black glass filled polyester PBT-GF30-FR
Flammability: UL 94V-O
Sleeve: Brass CuZn36Pb3 (C36000)
Contact clip (4 finger): Beryllium copper (C17200)
Accepted pin Ø: 0.40 to 0.56 mm
Forces: (polished steel gauge Ø 0.43 mm)
– Insertion 2 N typ.
– Withdrawal 1 N typ.
Mechanical life: min 100 cycles
Rated current: 1 A
Contact resistance: max 10 mΩ
Dielectric strength: min 1000 V RMS
Ordering information
PP Plating code Sleeve Clip
97 Tin Gold flash
91 Tin Gold 0.25 µm
93 Tin Gold 0.75 µm
Other plating on request see page
146 for plating specs
For complete part number replace
XXX with the code given below
left for the required contact length
L
Available contact length
Contact length L XXX code
6 mm 006
7 mm 018
8 mm 003
9 mm 012
10 mm 007
11 mm 002
12 mm 008
13 mm 009
15 mm 001
18 mm 011
22 mm 004
33 mm 013
No. of See
poles
A
B C
page 100
Order Codes
10 12.6
5.08 7.6 Fig. 1 116-PP-210-41-XXX001
4 5.0 7.62 10.1 Fig. 2 116-PP-304-41-XXX001
6 7.6 7.62 10.1 Fig. 3 116-PP-306-41-XXX001
8 10.1 7.62 10.1 Fig. 4 116-PP-308-41-XXX001
10 12.6 7.62 10.1 Fig. 5 116-
PP-310-41-XXX001
12 15.2 7.62 10.1 Fig. 6 116-
PP-312-41-XXX001
14 17.7 7.62 10.1 Fig. 7 116-
PP-314-41-XXX001
16 20.3 7.62 10.1 Fig. 8 116-
PP-316-41-XXX001
18 22.8 7.62 10.1 Fig. 9 116-
PP-318-41-XXX001
20 25.3 7.62 10.1 Fig. 10 116-
PP-320-41-XXX001
22 27.8 7.62 10.1 Fig. 11 116-
PP-322-41-XXX001
24 30.4 7.62 10.1 Fig. 12 116-
PP-324-41-XXX001
28 35.5 7.62 10.1 Fig. 13 116-
PP-328-41-XXX001
20
25.4 10.16 12.6 Fig. 14 116-PP-420-41-XXX001
22 27.8 10.16 12.6 Fig. 15 116-
PP-422-41-XXX001
24 30.4 10.16 12.6 Fig. 16 116-
PP-424-41-XXX001
28 35.5 10.16 12.6 Fig. 17 116-
PP-428-41-XXX001
32 40.6 10.16 12.6 Fig. 18 116-
PP-432-41-XXX001
10
12.7 15.24 17.7 Fig. 19 116-PP-610-41-XXX001
24 30.5 15.24 17.7 Fig. 20 116-
PP-624-41-XXX001
28 35.5 15.24 17.7 Fig. 21 116-
PP-628-41-XXX001
32 40.6 15.24 17.7 Fig. 22 116-
PP-632-41-XXX001
36 45.7 15.24 17.7 Fig. 23 116-
PP-636-41-XXX001
40 50.8 15.24 17.7 Fig. 24 116-
PP-640-41-XXX001
42 53.3 15.24 17.7 Fig. 25 116-
PP-642-41-XXX001
48 60.9 15.24 17.7 Fig. 26 116-
PP-648-41-XXX001
50 63.5 15.24 17.7 Fig. 27 116-
PP-650-41-XXX001
52 66.0 15.24 17.7 Fig. 28 116-
PP-652-41-XXX001
50
63.5 22.86 25.3 Fig. 29 116-PP-950-41-XXX001
52 66.0 22.86 25.3 Fig. 30 116-
PP-952-41-XXX001
64 81.2 22.86 25.3 Fig. 31 116-
PP-964-41-XXX001
110
PRECI-DIP DURTAL SA CH-2800 Delémont / Switzerland
Phone ++41 32 421 04 00 Fax ++41 32 421 04 01 [e-mail]
Due to technical progress, all the information provided is subject to change without prior notice
Series
116
DIL Sockets