Installation Instructions

Semi-Permanent Removable Threshold

Gelcoat & Solid Surface Bathware

(FIG. F)

(FIG. G)

(FIG. H)

(FIG. I)

to seal and secure into place. Caulk should be used for a

more aesthetically pleasing look.

3. Using the removable masking tape, secure the

threshold in place taking care not to shift. Silicone will

take 24 hours to dry and become rm. Bathware should

not be used during drying time.

ATTENTION:

On model numbers: A4136 or S4136 – You must bevel

the bottom inside of the threshold to allow it to seat

properly to the shower. (FIG. I)

For shower pans: The threshold will be cut to length,

however the corners will need to be slightly rounded.

(FIG. E)