Owner's Manual

7.6
a)
b)
c)
d)
e)
f)
g)
h)
i)
Test Mode
In Test Mode, it is possible to define the parameters
of the step, execute it, and if the result of your test is
approved, at the end of the operaon, transform it in
Recipe.
To access the Test Mode, click on the Opons
buon . In the Opons screen, touch the icon .
Define the parameters of Time, Temperature,
percentage of Hot Air, Microwaves and of the Lower
Resistance (Infra-red).
Press the buon to start the operaon of Test
Mode.
Aer the conclusion of the operaon, the Copy
Parameters icon will be enabled: .
Copy Parameters enables the user to transport the
parameters defined in Test Mode for the Edion of
Groups and Recipes, that is, when click on the
icon ,it will be necessary to inform the user's
access password to the sengs.
Aer informing the user's password, choose
between creang a new group or allocang the
transported parameters in a new recipe in an already
existent group.
Define the name of the New Recipe, the Image and
choose in which posion (step) you wish to allocate
the transported informaon.
To finalize, if you wish, define the other steps of the
recipe.
OPERATING ON
TEST MODE
COPY
PARAMETERS
TYPE THE ACCESS
PASSWORD TO THE
SETTINGS
******
1
4
7
2
5
8
0
3
6
9
OK
EDIT GROUP - page 1
CREATE NEW
GROUP
BREAKFAST
SANDWICH
SUBS PIZZA
BAKERY MEAL FINISHING TEX-MEX CHICKEN
WINGS
EDIT STEPS
50%
90%
20%
00:15
150°C
LOWER
RESISTANCE
250°C
TEMPERATURE
250°C
CHAMBER
RESISTANCE:
TEST
MODE
SETTINGSFAVORITES DAILY CLEANING
GUIDE
0 10 20 30 40 50 60 70 80 90 100
20
50
90
READY!
34