Spec Sheet

GENERAL INSTRUCTIONS
ELECTRICAL SPECIFICATIONS
DIMENSIONS
Voltage
(V)
Phases
Freq.
(Hz)
Power
(kW)
Circuit
(A)
Consum.
(kWh)
Cable Socket
Chef
Express
32A
(2P+T)
208
6.3
30
Single
60
3x10AWG
NEMA 6-30
4
USA /
Canada
240
7.1
30
Single
60
3x10AWG
NEMA 6-30
4
230
7.2
32
Single
50
5
Europe
220
6.3
32
Single
60
3x4mm²
4.4
Brazil
220
6.3
32
Single
60
4.4
Latin
America 60Hz
32A
(2P+T)
32A
(2P+T)
3x4mm²
3x4mm²
230
7.2
32
Single
50
5
Latin
America 50Hz
32A
(2P+T)
3x4mm²
Chef Express
Speed Oven
Product dimencions
Packing dimensions
Capacity
Chef
Express
Chamber
Dimensions
Height
Width
5 ¾"
146mm
Depth
14 ¼"
362mm
15 ½"
394mm
Height
Width
Depth
Weight
Width
Depth
Weight
194lbs
88kg
242lb
110kg
25¹⁄"
636mm
21"
532mm
31 ³⁄"
806mm
31 ¹⁄"
800mm
22"
560mm
33 ⁷⁄"
860mm
Height
Ensure that the electrical characteristics of the building network are in
accordance with the technical specications located on the data badge
located on rear panel of the unit. The outlet should be located no more than
6ft / 1.8m away from the unit.
This unit must be properly grounded to avoid electrical shock. This unit is
equipped with a 3-prong plug. This plug must be connected to a properly
installed and grounded outlet. In the event of an electrical short, properly
grounding the unit reduces the risk of electrical shock by grounding the
electrical current. The building electrical is the customer's responsibility.
PRODUCT DIMENSIONS
INSTALLATION
Exhaust
Outlets
Power
Cable
Maximum
Distance
Circuit
Breaker
Air Inlet
The oven must be installed on a base or counter that supports the weight
of the unit (approximately 194 lbs. / 88 kg)
For proper ventilation, a minimum space of 3" (76mm) between the rear of
the oven and the wall is required.
Do not block the air inlets and exhaust outlets located on the bottom and
rear of the oven.
It is not recommended for the unit to be positioned near stoves, deep
fryers, hot plates and other equipment that releases fat, fumes and heat.
The oven must be installed at a leveled and ventilated location.
Improper installation may void the equipment warranty.
Wall
Clearance
Back
3"
76mm
Right SideLeft Side
0.74 cu.ft
21L
0"
0mm
0"
0mm
700 mm292 mm
1015 mm
40 mm
40 mm
80 mm
766 mm
544 mm
100
mm
536
mm
441 mm
532 mm
636
mm
76 mm
1.8m