Owner's Manual
INSTALLATION AND OPERATION MANUAL
23
8.2 Cleaning the air filter
To access the catalyc converter, remove the baking stone, the rack, and the
boom jet-plate from the oven. Then remove the catalyst through a vercal
movement upwards, as shown in the following image.
Soak the catalyc converter in warm water with neutral detergent. Aer 15
minutes, rinse it thoroughly and put the catalyc converter back in the oven.
8.3 Cleaning the stone.
The stone should be cleaned with a cloth, sponge, a towel.
Note: DO NOT immerse the stone in water and don't use water to clean the
stone. If the stone is wet, let it dry completely before using it again.
NOTE
The Kay Oven Cleaner can be purchased through Ecolab distributors.
Dry it with paper
towels
7
Rub the grids and
holders
8
Reassemble the
oven
9