Product Manual

USE AND MAINTENENACE LIGHT TOWER
Setting the Lighting Tower
Lighting Tower integrated in the
generating set
1) By acting on the locking handle, it is
possible to rotate the lighting tower from
the horizontal to the vertical position. Lower
the stabilizing brackets by positioning them
onto the oor.
2) Place on the mast head and fasten by
the relevant hand-wheel, the oodlight unit.
3) By acting on the hand-pump placed
at base, the extension sequence of the
telescopic mast will start. It is possible to
place the lamp unit at the desired height.
4) Put the fuel valve “F” to the “ON” open
position, then the gen-set is ready for
ignition.
NOTE
To keep the working life of the pneumatic circuit, it is
recommended the manual locking of the sections by
the relevant hand-wheel.
ATTENTION: PLEASE CHECK IF THE LOCKING
THROUGH THE PROPER HANDLE HAS BEEN
CARRIED OUT CORRECTLY.
8