Pramac-GSW600V-Product-Card

Engine specifications
Engine Brand Volvo
Model TAD1642GE
[50Hz] Exhaust emission level Stage II
Engine cooling system Water
Nr. of cylinder and disposition 6 in line
Displacement cm³ 16120
Aspiration Turbocharged
intercooled
Speed governor Electronic
Prime gross power PRP kW 514
Maximum gross power LTP ESP kW 565
Oil capacity l 48
Lube oil consumption PRP (max) % 0.1
Coolant capacity l 93
Fuel Diesel
Specific fuel consumption 75% PRP g/kWh 195
Specific fuel consumption PRP g/kWh 198
Starting system Electric
Starting engine capability kW 7
Electric circuit V 24
ENGINE EQUIPMENT
Standards
The engine performance corresponds to ISO 3046, BS 5514 and DIN 6271.Ratings
are based on ISO 8528. Engine speed governing in accordance with ISO 3046/IV,
class A1 and ISO 8528-5 class G3
Engine and block
• Optimized cast iron cylinder block with optimum distribution of forces
• Tapered connecting rods to reduce risk of piston cracking
• Piston cooling for low thermal load on pistons and reduced ring temperature
• Replaceable valve guides and valve seats
• Overhead camshaft and four valves per cylinder
• Keystone top compression rings for long service life
Fuel system
• Fuel prefilter with water separator and waterin-fuel indicator / alarm
• Fine fuel filter with manual feed pump and fuel pressure switch
• Electronic unit injectors
Cooling system
• Efficient cooling with accurate coolant control through a water distribution duct in the
cylinder block. Reliable sleeve thermostat with minimum pressure drop
• Belt driven, maintenance-free coolant pump with high degree of efficiency
Lubrication system
• Full flow oil cooler
• Full flow disposable spin-on oil filters, for extra high filtration
• Gear type lubricating oil pump, gear driven by the transmission