Pramac-GSW45P-S-AS-Product-Card

ACP - Automatic control panel
Mounted on the genset, complete with digital control unit for monitoring, control and
protection of the generating set, protected through door with lockable handle.
DIGITAL INSTRUMENTATION
• Generating set voltage (3 phases).
• Mains voltage.
• Generating set frequency.
• Generating set current (3 phases).
• Battery voltage.
• Power (kVA - kW - kVAr).
• Power factor Cos φ.
• Hours-counter.
• Engine speed r.p.m.
• Fuel level (%).
• Engine temperature (depending on model)
COMMANDS AND OTHERS
• Four operation modes: OFF - Manual starting - Automatic starting - Automatic test.
• Pushbutton for forcing Mains contactor or Genset contactor.
• Push-buttons: start/stop, fault reset, up/down/page/enter selection.
• Remote starting availability.
• DC system disconnection switch.
• Acoustic alarm.
• Automatic battery charger.
• RS232 Communication port.
• Settable PASSWORD for protection level.
PROTECTIONS WITH ALARM
• Engine protections: low fuel level, low oil pressure, high engine temperature.
• Genset protections: under/over voltage, overload, under/over frequency, starting
failure, under/over battery voltage
PROTECTIONS WITH SHUTDOWN
• Engine protections: low fuel level, low oil pressure, high engine temperature,
• Genset protection: under/over voltage, overload, under/over battery voltage, battery
charger failure.
• Circuit breaker protection: III poles.
• Earth Fault included in the control unit.
OTHERS PROTECTIONS
• Emergency stop button.
• Panel protected through door with lockable handle.
OUT PUT PANEL ACP
3P+N+T 400V 63A n 1
Predisposed for remote control optional: RCG
Socket kit Optional