Pramac-GSW415V-Product-Card

ACP - Automatic control panel
Mounted on the genset, complete with digital control unit AC03 for monitoring, control
and protection of the generating set, protected through door with lockable handle
DIGITAL INSTRUMENTATION
• Generating set voltage (3 phases)
• Mains voltage
• Generating set frequency
• Generating set current (3 phases)
• Battery voltage
• Power (kVA - kW - kVAr)
• Power factor Cos φ
• Hours-counter
• Engine speed r.p.m.
• Fuel level (%)
• Engine temperature (depending on model)
COMMANDS AND OTHERS
• Four operation modes: OFF - Manual starting - Automatic starting - Automatic test
• Pushbutton for forcing Mains contactor or Genset contactor
• Push-buttons: start/stop, fault reset, up/down/page/enter selection
• Remote starting availability
• DC system disconnection switch
• Acoustic alarm
• Automatic battery charger
• RS232 Communication port
• Settable PASSWORD for protection level
PROTECTIONS WITH ALARM
• Engine protections: low fuel level, low oil pressure, high engine temperature
• Genset protections: under/over voltage, overload, under/over frequency, starting
failure, under/over battery voltage
PROTECTIONS WITH SHUTDOWN
• Engine protections: low fuel level, low oil pressure, high engine temperature
• Genset protection: under/over voltage, overload, under/over battery voltage, battery
charger failure
• Circuit breaker protection: III poles
• Earth Fault included in the control unit
OTHERS PROTECTIONS
• Emergency stop button
• Panel protected through door with lockable handle
OUT PUT PANEL ACP
Predisposed for remote control optional: RCG
External Terminal Board (ETB) Standard
Socket kit Optional