Pramac-GSW415V-Product-Card

Engine specifications
Engine Brand Volvo
Model TAD1343GE
[50Hz] Exhaust emission level Stage II
Engine cooling system Water
Nr. of cylinder and disposition 6 in line
Displacement cm³ 12780
Aspiration Turbocharged
intercooled
Speed governor Electronic
Prime gross power PRP kW 335
Maximum gross power LTP ESP kW 366
Oil capacity l 36
Coolant capacity l 44
Fuel Diesel
Specific fuel consumption 75% PRP g/kWh 193
Specific fuel consumption PRP g/kWh 192
Starting system Electric
Starting engine capability kW 7
Electric circuit V 24
ENGINE EQUIPMENT
Standards
The engine performance corresponds to ISO 3046, BS 5514 and DIN 6271. Power output guaranteed
within 0 to +2% att rated ambient conditions at delivery. Ratings are based on ISO 8528. Engine speed
governing in accordance with ISO 8528-5.
Engine and block
• Optimized cast iron cylinder block with optimum distribution of forces
• Wet, replaceable cylinder liners
• Crankshaft induction hardened bearing surfaces and fillets with seven bearings for moderate load on main
and high-end bearings
• Keystone top compression rings for long service life
• Replaceable valve guides and valve seats
• Tapered connecting rods for increased piston lifetime
• Over head camshaft and four valves per cylinder
Fuel system
• Electronic unit injectors
• Fuel prefilter with water separator and waterin-fuel indicator / alarm
• Fine fuel filter with manual feed pump and fuel pressure switch
Lubrication system
• Full flow oil cooler
• Full flow disposable spin-on oil filter, for extra high filtration
• Gear type lubricating oil pump, gear driven by the transmission
Cooling system
• Efficient cooling with accurate coolant control through a water distribution duct in the cylinder block.
Reliable sleeve thermostat with minimum pressure drop
• Belt driven coolant pump with high degree of efficiency