Product Card

Engine specifications
Engine manufacturer Volvo
Model TAD734GE
[50Hz] Exhaust emission level Stage II
Engine cooling system Water
Nr. of cylinder and disposition 6 in line
Displacement cm³ 7150
Aspiration Turbocharged
intercooled
Speed governor Electronic
Prime gross power PRP kW 227
Maximum gross power LTP kW 250
Oil capacity l 29
Lube oil consumption @ PRP (max) % 0.10
Coolant capacity l 32
Fuel Diesel
Specific fuel consumption @ 75% PRP g/kWh 217
Specific fuel consumption @ PRP g/kWh 204
Starting system Electric
Starting engine capability kW 5
Electric circuit V 24
ENGINE EQUIPMENT
Standards
The engine performance corresponds to ISO 3046, BS 5514 and DIN 6271. Ratings
are based on ISO 8528. Engine speed governing in accordance with ISO 3046/IV,
class A1 and ISO 8528-5 class G3
Engine and block
• Optimized cast iron cylinder block with optimum distribution of forces
• Keystone top compression rings for long service life
• Replaceable valve guides and valve seats
Fuel system
• Common rail
• Engine mounted fuel pre-filter with water separator
• Fine fuel filter of cartridge insert type
• Gear driven fuel feed pump
Lubrication system
• Rotary displacement oil pump driven by the crankshaft
• Deep front oil sump ,Oil filler on top, Oil dipstick, short in front
• Integrated full flow oil cooler, side-mounted
Cooling system
• Belt driven, maintenance-free coolant pump with high degree of efficiency
• Efficient cooling with accurate coolant control through a water distribution duct in the
cylinder block
• Reliable thermostat with minimum pressure drop
Intake and exhaust system
• Two-stage air filter, with cyclone