Product-Card

ACP - Automatic control panel
Automatic control panel mounted on the genset, complete with digital control unit for
monitoring, control and protection of the generating set.
INSTRUMENTATION DIGITAL
• Mains voltage.
• Generating set voltage (3 phases).
• Generating set frequency.
• Generator set current.
• Battery voltage
• Hours-counter.
COMMANDS AND OTHERS
• Operation modes: OFF - Manual Starting - Automatic Starting.
• Push-buttons: start/stop, fault reset, up/down/page/enter selection.
• Emergency stop button.
• Remote starting availability.
• Automatic battery charger.
• USB port.
PROTECTIONS WITH ALARM
• Engine protections: low oil pressure, high engine temperature
• Genset protections: under/over voltage, overload, under/over frequency, starting
failure, under/over battery voltage, battery charger failure
PROTECTIONS WITH SHUTDOWN
• Engine protections: low oil pressure, high engine temperature
• Genset protection: under/over voltage, overload, under/over battery voltage
• Circuit breaker protection
OTHERS
• Cover protection Power switch
OUT PUT PANEL ACP
Plinth row for connection from ACP to LTS panel. √
Power cables connection to Circuit Breaker. √